From November 20 to 22, 2017, Fluke, the world leader in electronic test tools, brought its electronic instrumentation products to the 2017 Shanghai International Power Exhibition. Among them, Ti450 SF6 gas leak detection thermal imager, Fluke1535 2500V high voltage insulation tester, Fluke 1748 mobile online power quality analyzer, DSX-8000 CH and other star products debuted by the spotlight.?

(Fluke booth)

• Ti450 SF6 Gas Leak Detector


• The Ti450 SF6 gas leak detection thermal imager can visualize SF6 gas leaks and easily locate leaks!
  At the same time it has 25mk thermal sensitivity, up to 640*480 measured infrared pixels, LaserSharp? laser autofocus, original MultiSharpTM multi-point focusing system, up to 1200°C detection range, and almost meets all industrial inspection requirements.

  “It is a test tool that integrates daily infrared thermal image detection and sulfur hexafluoride gas leak detection, making routine inspections more comprehensive and convenient.” Senior Fluorodetection Instruments (Shanghai) Co., Ltd. Department of Infrared Thermography Instruments Shen Jianxiang, technical consultant, said.

  

  (Shen Jianxiang introduces Ti450 SF6 gas leak detection thermal imager to the audience)

  High-voltage electrical equipment above 35kV will be filled with SF6 gas insulation. Once a leak occurs, it will first affect the insulation function of the equipment and threaten the safety of on-site personnel. At the same time, the greenhouse effect of this gas is 24,000 times that of ordinary carbon dioxide. Protection is extremely unfavorable.

  The commonly used leak detection method in substations is to use a pressure gauge to detect, but it is impossible to locate the leak point; second is to use a sniffing method, this means is relatively safe, but can not accurately locate the leakage point; the third is to use the refrigeration type instrument to detect, However, the cost of instruments in the market is high, about one million. Fluke's technological innovations enabled the Ti450 SF6 gas leak detection camera to locate leaks and drastically reduce prices, helping customers save costs.

• Fluke1535 2500V High Voltage Insulation Tester


• The Fluke1535 2500V high voltage insulation tester has an insulation resistance range of up to 500GΩ, fast measurement design, short circuit current up to 2mA or more, insulation resistance will reach stable readings faster, with automatically calculated polarization index (PI) / dielectric Absorption ratio (DAR) function; Low-power design meets high-intensity work requirements, 2500V measurement up to 1300 times; with high safety design, in line with CAT IV 600V standard and power industry specification DLT845.

  

  (Fluke1535 2500V Insulation Tester)

  According to Shen Jianxiang, the Fluke 1535 2500V high-voltage insulation tester can immediately stop applying pressure as soon as it detects an insulation leak, compared with a conventional shake meter, to avoid secondary damage to the tested equipment. In addition, a 5mA short-circuit current enables fast and stable detection of capacitor-based power equipment.

• Fluke 1748 Mobile Online Power Quality Analyzer
• “Two types of recorders are commonly used for power detection. One is a portable power quality recorder. The focus is on viewing the test results on the spot; the other is an on-line power quality recorder. The on-site fixed installation allows long-term recording. The cost is relatively high.” Fluke test Instrumentation (Shanghai) Co., Ltd. Application Manager of Industrial Test Instruments Division Qian Feng said that customers prefer flexible and cost-effective solutions.

  

  (Fluke 1748 Mobile Online Power Quality Recorder)

  In this regard, Fluke developed and introduced the Fluke 1748 online mobile power quality recorder, which combines the advantages of a portable power quality recorder and an online power quality recorder, and can be optionally installed at the testing site for multiple temporary networking. It also has analog input function, not only recording power quality parameters, but also recording process parameters, such as non-electric parameters such as speed and temperature flow. The WIFI function of the product can meet the site where wiring is impossible. Protection level up to IP65.

• DSX-8000 CH


• With the popularity and development of the Internet, most companies have established their own websites, and network maintenance has become routine. "A lot of times, network problems are caused by its physical layer, such as unstable connections, problems with the wire itself, too high return loss, improper construction, and problems with the splice point. The DSX-8000 CH is like a 'scavenger on a network highway' 'To help users perform qualitative and quantitative analysis of problems that occur on the network's physical layer to ensure smooth connections and prevent data packet loss,' said Cai Zhuimin, sales manager of the network division of Fluke Test Instruments (Shanghai) Co., Ltd.

  

  （DSX-8000 CH）

  The DSX-8000 CH is VersivTM modular and supports copper certification, fiber loss certification, OTDR testing, and fiber inspection, built-in external crosstalk (AxTalk) testing capabilities, LinkwareTM Live compatibility, and support for Cat 6A, 8, FA I/ With Level II and all current standards, the ProjeXTM system manages job requirements and the entire process from project setup to system acceptance to ensure that all testing tasks are completed correctly. Provides analytical test results and creates professional test reports using LinkWareTM management software

  Over the years, Fluke has created and developed a specific technology market, providing high-quality electronic instrumentation products for testing and detecting faults in various industrial sectors, and taking this market to an important position.

  In order to cater to the trend of intelligence, Fluke keeps up with the times and upgrades products according to the needs of users. Through this exhibition, you can see Fluke continue to extend in both depth and breadth:
  used in electrical measurement, temperature measurement, network testing products more professional, such as sulfur hexafluoride increased infrared camera detection;
  equipment The instrument product adds Fluke Connect wireless transmission function to form data sharing.
  At the same time, it provides intelligent terminal Fluke APP software that can transmit, record, analyze, and share data information in real time. It can realize similar data sharing and group sharing;
  to enhance ease of use, some The instrument will change the display screen to a touch screen, and the operation screen menu screen will be developed to the smart (smartphone), which is more in line with the user's usage habits;
  new intelligent functions, such as the infrared camera thermal imaging function, multi-point focus function, Installation of lens chip identification functions, etc.;
  product applications are becoming more extensive, infrared thermal imager products extend to industrial gas detection, industrial imaging applications, particle counters, anemometers, illumination meters, temperature and humidity meters and other products to the environmental measurement Expand and expand the application of network testing instruments.